Home > Manufacturers > Other... > Belair >

Belair Networks BELAIR100-11-D
BELAIR100-11-D: BelAir Networks BA100 Wireless Dual Radio Node
See below for more details
 
Alternative Views:


BELAIR100-11-D: BelAir Networks BA100 Wireless Dual Radio Node
Original List $3,600.00
Refurbished Price $135.00

Stock Status:Temporarily Out of Stock
Availability: Usually Ships within 24 hours
Product Code: BELAIR100-11-D


Qty:
Description Extended Information
 
BELAIR100-11-D: BelAir Networks BA100 Wireless Dual Radio Node
Features
GENERAL INFORMATION
ManufacturerBelAir Networks, Inc
Manufacturer Part NumberBELAIR100-11-D
Website Addresswww.belairnetworks.com
Product NameBA100 Wireless Dual Radio Node
Marketing InformationThe BelAir100 Wireless Multi-service Node is the industrys
highest performance and most flexible dual-radio wireless
mesh node. It provides mobile broadband support for Wi-Fi,
WiMAX, and 4.9 GHz Public Safety spectrums. Offering
true standards-based seamless mobility, the BelAir100
ensures that subscribers do not experience service
interruptions to critical applications, like voice and video,
as they move throughout the wireless mesh network.
Features Modular dual-radio architecture
Supports Wi-Fi and WiMAX
Seamless mobility for uninterrupted service
Network Management via CLI,WEB or BelView NMS
Electrical and optical Ethernet interface options
Radio Module Options
Access Radio Module (ARM) IEEE 802.11a/b/g & 4.9 Public Safety
Backhaul Radio Module (BRM) IEEE 802.11a pre-WiMAX & 4.9 Public Safety
WiMAX Radio Module (WRM) IEEE 802.16d
Radios available in multiple frequency bands
- licensed: 2.3 GHz, 2.5 GHz and 4.9 GHz
- unlicensed: 2.4 GHz and 5.25-5.85 GHz
Layer 2 Networking Capabilities
The BelAir100 has an integrated Layer 2 Switch engine
that provides extensive QoS,VLAN, Network Security
and Traffic Management capabilities that are necessary for
transporting mission critical, time-sensitive applications
like voice and video.
Network Management
The BelAir100 can be managed via a Command Line
Interface (CLI),WEB GUI or with BelAir Networks
BelView Network Management System (NMS). Both
CLI and WEB GUI provide device level support, and
BelView NMS provides complete network-wide
support for Fault, Configuration and Performance
Management. BelView NMS works on either
Windows XP or SUN Solaris platforms and can
also be integrated into other management systems
like HP OpenView or IBM NetView.

1-port 10/100BASE-TX (Cat. 5 RJ-45)
1-port 100BASE-FX (SMF)
IEEE 802.1D MAC Bridging
IEEE 802.1Q VLANs
IEEE 802.1w (RSTP) and IEEE 802.1s (MSTP)
IEEE 802.1p prioritization with 4 queues
L2TP Tunneling for seamless mobility
16 SSIDs per access radio. MBSSID support for 8 virtual
APs per access radio
Support for SNTP, ICMP, HTTP,ARP,TCP, UDP,Telnet,
TFTP and IP traffic
Management Secure local and remote access
Command line, HTTP and HTTPS Web GUI,
SNMPv1/v2/v3 and SSHv2 management interfaces
MIBs: MIB-II, SNMPv2, 802.11, Ethernet-like, Interface Group
Multiple user privilege levels with RADIUS authentication
Firmware upgrade through TFTP with support for
automatic rollback
RADIUS accounting
Security Authentication: 802.1x (RADIUS) and EAP methods
Encryption:WEP 64 and 128 bit,TKIP / MIC per 802.1x,
802.11i AES
MAC address access control lists
Rogue AP detection


Share your knowledge of this product with other customers... Be the first to write a review
daily deal button
new products button